Problematic grey water reading

Please forgive me for not researching this on the site but we are in Spain and I only have my phone. I know from reading on the forum that the grey water readings are often incorrect and mine is following suit. When it claims to be full the alarm sounds and it cuts off water to the taps etc. My question is can this facility be bypassed on a temporary basis whilst we are travelling.

You may be able to bipass the cut off from the control panel setting mode. With the panel showing the auto sleeper logo, press the top and bottom buttons until you here a bleep, you can now scroll through the setting options. I don't know if there is an option to disable the cut out, but it's worth a try.

I didn't know there is a cut-out, so I shall watch with interest.

Yet another pointless "automation" just waiting to cause problems if it goes wrong. Have we lost the ability to think for ourselves and make common sense decisions?

I've just had a look at my panel, the first option is to turn the water alarms off, maybe this would disable it.

Over night it settled to half tank which is correct since the fresh water also is at half tank. I will remember the advice however.