Rear reversing sensors

Sorry, have you just fitted these or have they packed up and you need help?

I think 2 of the sensors may have got damaged when my wife reversed recently into a wall.

If you can get under the rear of the van, these can usually be individually unplugged very easily. If the cables reach, swapping the connectors with allow you to prove if the fault stays with the sensor.

If you do get under the van, make sure you tell the wife you are there!!!

Dbvwt wrote:If you can get under the rear of the van, these can usually be individually unplugged very easily. If the cables reach, swapping the connectors with allow you to prove if the fault stays with the sensor.

If you do get under the van, make sure you tell the wife you are there!!!

Thanks,

 If I tell my wife I'm under the van she probably would start it up!!

I'm more interested in trying to find make of kit so I can replace damaged sensors, any ideas!

Sorry, can’t help with make of kit, I may be wrong but it looks an aftermarket installation.
I’ve used these guys over the years on my previous cars, very helpful so may be worth a call

[You must be registered and logged in to see this link.]

Dbvwt wrote:Sorry, can’t help with make of kit, I may be wrong but it looks an aftermarket installation.
I’ve used these guys over the years on my previous cars, very helpful so may be worth a call

[You must be registered and logged in to see this link.]

Thanks

If no one else has any ideas I shall give them a call.

Is here no form of label, logo or other markings on the dash unit that would give a clue?

Lots like that on eBay. I don't think sensors are unit specific.Mine are plug in

rogerblack wrote:Is here no form of label, logo or other markings on the dash unit that would give a clue?

Thanks for replying. 

There appears to be no manufactures logo or otherwise on dash unit or sensors. I'm afraid it looks like I will have to purchase complete new kit.

Thank you also Dbvwt for your input.

Jim