Truma Fire not igniting

We had a weekend without electricity, got the fridge working fine on Gas but when I went to put the fire on there was no spark.
It’s a Truma S3002 & tonight I took the front cover off & changed th AA battery but still no spark, I didn’t have the gas turned on tonight a presume  it should spark without gas?.
Any ideas.

Bizarrely this week I too had no ignition on my similar one!
Changed battery. Ignition only works when the gas valve is open, I use 6 or 7 on the knob and then the knob pressed downwards. That should light the pilot, releasing the knob then allows full gas flow.

IanH wrote:Bizarrely this week I too had no ignition on my similar one!
Changed battery. Ignition only works when the gas valve is open, I use 6 or 7 on the knob and then the knob pressed downwards. That should light the pilot, releasing the knob then allows full gas flow.

Thanks Ian will try it tomorrow

Unfortunately it was my generator igniter what is at fault £90

Tigerbadge wrote:Unfortunately it was my generator igniter what is at fault £90

EEK Where did you go for that?

gassygassy wrote:
EEK Where did you go for that?

I got mine off of eBay as they were the cheapest