Help.

by mcalid Thu May 16, 2019 1:27 am

I have a crack in the cover of the awning light of my Nuevo 2008.
I want to replace it if Autosleeper have the part but I have no idea how to remove it.
Help would be most welcome.
Thanks.

by PLOUGHLIN Thu May 16, 2019 9:54 am

Is it like this?

[You must be registered and logged in to see this image.]

If so it is a Lumo, but discontinued now. I doubt the lens is available seperately.
It is fixed by the two screws and also mastic. The lens can be detached with screws through the back after removing from the van.

Some places have old stock [You must be registered and logged in to see this link.]

by raymondo Thu May 16, 2019 10:16 am

I doubt that that is the light - it certainly isnt what is fitted to my 2008 Nuevo.
Mine is an opaline oval light with no visible external fixings - I THINK its probably glued on with sikaflex or similar and would need to be cut off with a sharp knife - but Im sure that someone will know for sure

by burlingtonboaby Thu May 16, 2019 10:37 am

There should be a wee slot where the cover meets the lamp base ,insert a slotted screw driver and the cover should ease out.
We had a Neuvo 09 back in 2014.
Boaby

by **roli** Thu May 16, 2019 10:45 am

If it’s the light on the van inyour avatar then these are available from. most dealers accessory shops

by mcalid Sat May 18, 2019 11:49 pm

PLOUGHLIN wrote:Is it like this?

[You must be registered and logged in to see this image.]Not like this one but many thanks for taking the time to reply.

If so it is a Lumo, but discontinued now. I doubt the lens is available seperately.
It is fixed by the two screws and also mastic. The lens can be detached with screws through the back after removing from the van.

Some places have old stock [You must be registered and logged in to see this link.]

by mcalid Sat May 18, 2019 11:54 pm

raymondo wrote:I doubt that that is the light - it certainly isnt what is fitted to my 2008 Nuevo.
Mine is an opaline oval light with no visible external fixings - I THINK its probably glued on with sikaflex or similar and would need to be cut off with a sharp knife - but Im sure that someone will know for sure

You are quite right Raymondo, it is as you describe but there is no way I will cut anything off my pride and joy.
Many thanks for your reply.

by mcalid Sat May 18, 2019 11:59 pm

burlingtonboaby wrote:There should be a wee slot where the cover meets the lamp base ,insert a slotted screw driver and the cover should ease out.
We had a Neuvo 09 back in 2014.
Boaby

Thanks Boaby, I haven't checked it due to work pressure but this sounds probable.
Thanks for the help.

by mcalid Sun May 19, 2019 12:01 am

roli wrote:If it’s the light on the van inyour avatar then these are available from. most dealers accessory shops

It is as you describe Roli. Off to the dealer shortly.
Many Thanks.

Help.

Help.

Re: Help.

Re: Help.

Re: Help.

Re: Help.

Thanks.

Thanks.

Thanks.

It is.