The Auto-Sleeper Motorhome Owners Forum (ASOF)
Would you like to react to this message? Create an account in a few clicks or log in to continue.

2019 Bourton Cycle Rack

5 posters

Go down

2019 Bourton Cycle Rack  Empty 2019 Bourton Cycle Rack

Post by ericshaw Thu Feb 04, 2021 3:40 pm

I have a 2019 Bourton with 2 cycle rack fixing bars on the rear panel , can anyone tell me which cycle rack will fit ?
Many thanks .
ericshaw
ericshaw
New Member
New Member

Male

Posts : 3
Joined : 2020-11-01
Location : Coventry
Auto-Sleeper : Bourton
Vehicle Year : 2019

Back to top Go down

2019 Bourton Cycle Rack  Empty Bourton Bike Rack

Post by Boggie Thu Feb 04, 2021 5:54 pm

Hi,
The  pre mounted rails on the Bourton (and Corinium )  are for the Fiamma Carry Bike CN. Leisure outlet.com on line has them for sale at £202. It is a easy DIY installation.

The rails are approx 475 mm apart plus or minus. You have to mount the vertical supports, adjusting them to the individual distance between the rails and then drill and fit 2 bolts to lock the length.
Once the vertical supports are on you can then mount the horizontal elements

Before fitting the vertical elements, pull of the 4 plastic end caps, unscrew the 4 x small retainer tabs and screw, then pull out the 4 x main locating pins. This allows you to pull out the 4 x plastic oval shaped covers over the rack mounting holes. Don’t try to prise out the grey plastic covers until the locating pins are removed
Place the vertical supports in place and reinsert the locating pins retainer tabs and screws, before fitting the horizontal elements.
Boggie
Boggie
Member
Member

Male

Posts : 37
Joined : 2020-10-26
Location : Oldcotes, Nottinghamshire
Auto-Sleeper : Bourton
Vehicle Year : 2019

Back to top Go down

2019 Bourton Cycle Rack  Empty Re: 2019 Bourton Cycle Rack

Post by LDPD Thu Feb 04, 2021 6:56 pm

ericshaw wrote:I have a 2019 Bourton with 2 cycle rack fixing bars on the rear panel , can anyone tell me which cycle rack will fit ?
Many thanks .
As has previously been reported ( [You must be registered and logged in to see this link.] )  you may find that when loaded with bikes your rear number plate and rear lights may be obscured hence requiring a lighting board which will require a suitable  plug etc

Oops Caraman pipped my post!!


Last edited by LDPD on Thu Feb 04, 2021 6:58 pm; edited 2 times in total

_________________
A retired couple, young at heart, in Oxfordshire
LDPD
LDPD
Donator
Donator

Male

Posts : 119
Joined : 2017-12-12
Location : Oxford
Auto-Sleeper : Bourton
Vehicle Year : 2019

Caraman likes this post

Back to top Go down

2019 Bourton Cycle Rack  Empty Re: 2019 Bourton Cycle Rack

Post by Caraman Thu Feb 04, 2021 6:57 pm

If you fit a bike rack you will almost certainly need a lighting board.  There is a long thread here about it:

[You must be registered and logged in to see this link.]
Caraman
Caraman
Member
Member

Male

Posts : 1101
Joined : 2019-04-19
Location : SALISBURY
Auto-Sleeper : Nuevo
Vehicle Year : 2019

LDPD likes this post

Back to top Go down

2019 Bourton Cycle Rack  Empty 2019 Bourton Cycle Rack

Post by ericshaw Sun Feb 07, 2021 2:14 pm

May thanks for all useful info . smile!
ericshaw
ericshaw
New Member
New Member

Male

Posts : 3
Joined : 2020-11-01
Location : Coventry
Auto-Sleeper : Bourton
Vehicle Year : 2019

Back to top Go down

2019 Bourton Cycle Rack  Empty Re: 2019 Bourton Cycle Rack

Post by Wide-Awake Sun Feb 07, 2021 3:44 pm

If you are going to put E-bikes on the rack it might be worth looking at the Fiamma Pro C E-Bike rack. Also the Fiamma Licence Plate Holder Part No. 06146A01- is easy to install, but quite expensive, and can be folded down when the rack is in the up position.
Wide-Awake
Wide-Awake
Member
Member

Male

Posts : 13
Joined : 2018-10-11
Location : East Midlands
Auto-Sleeper : Bourton
Vehicle Year : 2020

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum