The Auto-Sleeper Motorhome Owners Forum (ASOF)
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Panel removal

2 posters

Go down

Panel removal  Empty Panel removal

Post by Libraryman2 Fri Aug 28, 2020 6:28 pm

Hi all, the wooden facia above my hab door appear to have something rattling behind it...anyone know if it’s easy to remove?.

It holds the Sargent control panel must hide all the wiring!   There are 4 round plastic caps covering the screws...I’m guessing that if I unscrew will pull forward..

Anyone already pulled it off, I don’t want to risk blowing it up rolleyes



Posts : 903
Joined : 2016-03-03
Member Age : 69
Location : Blythe Bridge Staffordshire
Auto-Sleeper : Corinium FB
Vehicle Year : 2017

Back to top Go down

Panel removal  Empty Re: Panel removal

Post by KMRTOPAZ Fri Aug 28, 2020 11:28 pm

Removed that today as part of the access work prior to fitting a SOG.  Before commencing, lever off the control panel  surround, remove two screws to release  the panel, pull away to check how much cable you have, then push all back (including the panel) through the aperature.
The plastic caps come off readily to reveal the holding screws.   In the Warwick Duo there were about eight.  But there were also a couple of countersunk screws with a small laminate disc covering the head. Not easy to spot !


Posts : 814
Joined : 2014-12-26
Member Age : 89
Location : North Wales
Auto-Sleeper : Warwick Duo
Vehicle Year : 2016

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum