Nuevo high level brakelight

Having had our first season withe the Nuevo (2009 model), decided to fit a reversing camera and decided the inclined panel just below the high level brakelight would be the perfect position. On inspection cannot see how to remove the brakelight to gain access to the inside of the panel. Having spent a couple of hours perusing the forum I guess acces is by removing the over cooker cupboard. If anyone knows a better way I would be pleased to hear.

Bob (alias Colincamper).

The light is glued in. You need to use a pallet knife or similar to work round and break the seal to get it out then glue it back in with Sikaflex. If you are good at measuring, its easier to cut a panel in the back wall of the cupboard rather than removing it.