water pump sympol missing

Hi could some help me please, I've got a 57 plate nuevo with bonus pud4m distribution board/charger... 
Problem I have is the LCD control panel above the door... 
The water tap symbol is now missing and my taps don't work.. every thing else works on it, I've tried pressing the reset button on the back of the panel 
Has anyone had this problem before if so what is the solution.. 
Thank you in advance for any replies

Hi ianscoe, welcome to the forum.
You have accidentally turned off the pump symbol.
Turn on the board and then touch the centre of the screen.
On the next screen you will see setup on the right hand side.
Touch this to bring up the next screen and in the lower left corner you will see the pump symbol .
Touch this to get a tick instead of an X, press return and return and your pump switch will have magically reappeared.

Derek

Hi Derek... brilliant!!!! Thank you very very much.... when I called auto sleeper they had said it needs a new control panel and would cost 475.00 +VAT. So you have saved my customer a lot of money... thank you again