Table Storage in Gloucester/Malvern

Go down

Table Storage in Gloucester/Malvern Empty Table Storage in Gloucester/Malvern

Post by gemdeco on Mon Feb 19, 2018 1:46 pm

Hi Everyone
         We have a dedicated cupboard in our Gloucester/Malvern for out table has any one done any mods on the storage as it fits very badly and rattles,there seems to be blocks on the floor used for fitting panels together so the table will not lay flush and no fitting to locate the table at the rear of the cupboard to stop it swinging out
kind regard 
alan
gemdeco
gemdeco
Member
Member

Male

Posts : 505
Joined : 2014-07-15
Member Age : 68
Location : Little Bookham Surrey
Auto-Sleeper : Gloucester
Vehicle Year : 2010

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by PLOUGHLIN on Mon Feb 19, 2018 2:06 pm

My mod is a cushion stuffed in. My table does fit flush but something on the outboard wall to clip the table in position would help.

_________________
Peter L
PLOUGHLIN
PLOUGHLIN
Donator
Donator

Male

Posts : 2997
Joined : 2014-06-24
Member Age : 49
Location : NORTH HERTS
Auto-Sleeper : MB Gloucester
Vehicle Year : 2011

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by Peter Brown on Mon Feb 19, 2018 2:50 pm

[You must be registered and logged in to see this link.]

Small folding table and brolly act as padding

[You must be registered and logged in to see this link.]

Swiveling plastic clips to front and top

[You must be registered and logged in to see this link.]

self adhesive felt pads at 'contact' points

_________________
Peter #1
Peter Brown
Peter Brown
Member
Member

Male

Posts : 5289
Joined : 2012-11-10
Member Age : 67
Location : Staffs
Auto-Sleeper : Malvern
Vehicle Year : 2011

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by PLOUGHLIN on Mon Feb 19, 2018 3:29 pm

That clip at the top is a good idea.Ebay here I come.

_________________
Peter L
PLOUGHLIN
PLOUGHLIN
Donator
Donator

Male

Posts : 2997
Joined : 2014-06-24
Member Age : 49
Location : NORTH HERTS
Auto-Sleeper : MB Gloucester
Vehicle Year : 2011

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by gemdeco on Mon Feb 19, 2018 5:12 pm

Hi
    I have a clip at the front but not a the top unless I left my glass's behind again ,I will get one from AS when I visit to match and maybe a couple of blocks on the back wall if it is strong enough
Regards
Alan
gemdeco
gemdeco
Member
Member

Male

Posts : 505
Joined : 2014-07-15
Member Age : 68
Location : Little Bookham Surrey
Auto-Sleeper : Gloucester
Vehicle Year : 2010

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by Peter Brown on Mon Feb 19, 2018 5:22 pm

I put the top one on but couldn't reach to the back. They use some corner locators for tables fixed inside wardrobes - if you could get a couple of those at the back it would be solid.

_________________
Peter #1
Peter Brown
Peter Brown
Member
Member

Male

Posts : 5289
Joined : 2012-11-10
Member Age : 67
Location : Staffs
Auto-Sleeper : Malvern
Vehicle Year : 2011

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by Gromit on Mon Feb 19, 2018 6:04 pm

Peter Brown wrote:I put the top one on but couldn't reach to the back.  They use some corner locators for tables fixed inside wardrobes - if you could get a couple of those at the back it would be solid.
Like these Peter?   CLICK HERE


[You must be registered and logged in to see this image.]
Gromit
Gromit
Donator
Donator

Male

Posts : 5785
Joined : 2015-03-11
Member Age : 76
Location : Worcestershire
Auto-Sleeper : Nuevo EK LP
Vehicle Year : 2015

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by gemdeco on Mon Feb 19, 2018 6:08 pm

Hi Gromit
     How deep are they I cannot open them up
Regards
Alan
gemdeco
gemdeco
Member
Member

Male

Posts : 505
Joined : 2014-07-15
Member Age : 68
Location : Little Bookham Surrey
Auto-Sleeper : Gloucester
Vehicle Year : 2010

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by PLOUGHLIN on Mon Feb 19, 2018 6:23 pm

[You must be registered and logged in to see this link.]

_________________
Peter L
PLOUGHLIN
PLOUGHLIN
Donator
Donator

Male

Posts : 2997
Joined : 2014-06-24
Member Age : 49
Location : NORTH HERTS
Auto-Sleeper : MB Gloucester
Vehicle Year : 2011

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by Gromit on Mon Feb 19, 2018 6:41 pm

gemdeco wrote:Hi Gromit
     How deep are they I cannot open them up
Regards
Alan
"Deep enough" is the short answer I guess. smile! As far as I know they are a standard depth, but there is a 5mm spacer available from Leisureshop Direct (and other suppliers no doubt).

Thanks Peter L for the link. Mine failed for some reason.
Gromit
Gromit
Donator
Donator

Male

Posts : 5785
Joined : 2015-03-11
Member Age : 76
Location : Worcestershire
Auto-Sleeper : Nuevo EK LP
Vehicle Year : 2015

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by Peter Brown on Tue Feb 20, 2018 8:51 am

Yes, those are what  meant. uh

_________________
Peter #1
Peter Brown
Peter Brown
Member
Member

Male

Posts : 5289
Joined : 2012-11-10
Member Age : 67
Location : Staffs
Auto-Sleeper : Malvern
Vehicle Year : 2011

View user profile

Back to top Go down

Table Storage in Gloucester/Malvern Empty Re: Table Storage in Gloucester/Malvern

Post by daisy mae on Tue Feb 20, 2018 10:13 am

I have moved my table out of the wardrobe, too heavy and awkward for me to lift above the drawers and into a small slot, have put it behind passenger seat, temporary  fix ,a bungee strap around seat, I need it to go behind drivers seat, more width, but I have two power points there that are in the way, bottom of wood seat back, have to get them moved.

err sorry goneoff not really helpful to the op


Last edited by daisy mae on Tue Feb 20, 2018 10:19 am; edited 1 time in total (Reason for editing : sorry)
daisy mae
daisy mae
Donator
Donator

Female

Posts : 5625
Joined : 2013-02-03
Location : Leicestershire
Auto-Sleeper : Amethyst and Topaz
Vehicle Year : 2003.98

View user profile

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum